Mobiclinic S220 Sevilla Manual De Instrucciones página 16

ES EN FR IT
3. DELIVERY AND PREPARATION FOR USE
Your wheelchair is usually delivered fully assembled, folded, and with the rear wheels
mounted. A lew simple steps are enough to prepare it for use. The rear wheels of Models
S-20 Sevilla and Model S230 Sevilla were unassembled, its wheels and axles are labeled
with a letter R (Right) and L (Left) for a proper assembly. Please refer step 3.1. to assemble
firstly before use.
The content in the packaging carton box is as follows:
1.FoIded wheelchair.
2. Disassembled rear wheels (Models S220 Sevilla and S230 Sevilla) attached to
the wheel structure.
3. Accesory box:
- Footrest
- Heel strap
- Pre-Adjusted Quick-Release axles identified with R (Right) and L (Left).
- Wrenches (Allen or hexagonal depending on the wheelchair model)
- Instructions for use
3.1. Install rear wheels by Quick-Release axles. (Figure 1)
Press and hold the cap of axle, insert the center hole of rear wheel, and then insert the
hole of wheelchair frame. (Figure 2).
Install the left axle and left rear wheel to the left side of the chair and install the right axle
and right rear wheel to the right side of the chair. To determine about the sides of the
wheelchair, unfold the chair and stand behind it, holding the handles: Right and left side
will be your right and left hands subsequently.
DE PT NL
SWE
PL DK
WHEELCHAIR
S220 Sevilla | S230 Sevilla