ARENDO 305865 Manual Del Usuario página 25

5. Commissioning and use
Connect the power cord to a properly wired power socket. First proceed as
described in Section "3 Commissioning".
Ensure that the power plug has been inserted. Insert up to two toast slices
into the toast slot. Press the "Slide switch" down until it clicks into place. Then
press the Degree of toasting "+" or the Degree of toasting "-" button to adjust
the desired degree of toasting. The heating elements warm up and the toasting
process begins.
Note: The last configured degree of toasting is saved in the appliance.
Once the process is complete, the "slide switch" automatically jumps back to its
original position. This means that the toasting process has finished and the bread
slices can be taken out carefully.
If the degree of toasting is not satisfactory, adjust it using the degree of roasting
"+" or degree of toasting "-" buttons and repeat the toasting again. In this case,
ensure that the toast does not get burnt. If the desired degree of toasting has
already been attained, you may then end the process at any time by pressing the
"CANCEL" key.
6. Bread roll attachment
Bread rolls, baguettes and loaves are too large to place in the toasting slot. Always
use the integrated bread roll warming rack for this purpose. Use the lever for the
bread roll warming rack to open it.
Note: Ensure that the crumb collector has been inserted correctly.
Before toasting on the bread roll attachment, ensure that the toaster has cooled
down completely. Ensure that no toast has been inserted into the "toast slot"
when using the bread roll warming rack, as otherwise this can result in fire.
If you do not wish to use the bread roll warming rack, remove it by folding it.
Generally, more time is required to achieve the desired degree of browning when
using the bread roll warming rack. It is advisable to turn the items on the bread
roll attachment.
25
English