Druck Dry PTC 200 Manual De Instrucciones página 4

2. Unpacking
The following items are supplied with all types of equipment:
Dry Temperature Calibrator
Metal block calibrator
Power Supply connection cable
Adaptor sleeve
Sleeve remover/Changing Tool
Test Certificate
Operating Manual
Protective Packaging
User Manual
a. Save the packaging for returning the equipment to Druck for service and repair.
3. Environmental and Safety
3.1 Environmental
The equipment is design to operate in the following conditions:
Operating Altitude:
Operating Temperature Range:
Storage Temperature Range:
Humidity Range:
Power Supply:
Power Supply Voltage Fluctuations
Pollution degree
Ingress Protection
EMC
Electrical Safety
Pollution degree
Operating Environment
Copyright 2022 Baker Hughes Company.
2 | Dry PTC / Liquid PTC Calibrators–English
a
Liquid Temperature Calibrator
Calibration Bath
Power Supply connection cable
Seal Cover
Work Cover (with five silicone stoppers)
Magnetic Stirrer
Magnetic Lifter
Bilge Pump
Bottle with Silicone oil
Test Certificate
Operating Manual
Protective Packaging
a
User Manual
Silicone Oil (10 or 50 CS)
Up to 2000 m (6500 ft)
0°C to 50°C (32°F to 122°F)
-10°C to 60°C (14°F to 140°F)
30% to 95% (Relative humidity non
condensing)
Transient over-voltages up to the levels of
Over-voltage Cat II
Up to 10% of the nominal voltage
2
IP20 (EN 60529) Indoor use only
EN 61326
EN 61010-1
2
DO NOT use in potentially explosive
environments