Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL INFORMATION
Make sure to use the studs in your wall before mounting the wall plate.
Do not mount this product into the drywall
▶Distance min / max. the wall: 26mm
PARTS INCLUDED
WARNINGS
▶1. The wall or mounting surface must be capable of supporting the
combined weight of the mount and display; On the contrary, the
structure must be reinforced.
▶2. Locate any pipes, cables, or any other obstacles in the wall where
you are going to install the bracket before drilling.
▶3. Appropriate tools and safety equipment must be used. Failure to
do so may result in injury or damage.
▶4. We recommend two people for installation. Do not attempt to lift a
heavy screen without assistance.
▶5. Follow all instructions and recommendations regarding proper
ventilation and location to mount your screen..
Note
In order to avoid accidental damage or injury, it
is recommended that this product be installed by
a professional. The supplier is exempt from any
responsibility for damages or injuries caused by a improper
Instruction manual
FACILITY
1. Take the long horizontal support.
2. Drill four holes in the wall after measuring the distances
to fit the wall mount body. Insert the four plastic anchors (A)
into the holes, and then secure the body of the wall mount to
the wall by inserting the four screws (B) through the slots and
into the anchors. Make sure the opening slots are hanging
down and the shelf is facing you. Use a drill to fit it.
3. Take the long uprights and install them to the back of
the flat screen TV. Insert the mounting screws (C or D) and
washers (E) into the holes in the brackets and place them in
the holes on the back of the TV. Use a screwdriver for further
fixation.
4. Take the two long vertical brackets with the TV mounted
and fit the slots into the projections of the long horizontal
brackets (F). Use the screws to tighten the vertical supports.
installation.
ref. 50139
ES
PT
EN
FR
Publicidad
