Descargar Imprimir esta página

mspa Nest Manual Del Propietário página 14

Ocultar thumbs Ver también para Nest:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Water Treatment:
It is good practice with an existing spa to keep all air jets open and valves closed to allow chemically treated water to flush through all pipework.
Always follow the chemical manufacturer's directions, and the health and hazard warning.
Never mix chemicals together. Add the chemicals to the spa water separately. Thoroughly dissolve each chemical before adding it to the water.
Please note that chlorine and bromine products should never be mixed. This is extremely dangerous. If you usually use chlorine-based products and
you want to switch to bromine-based products, or vice versa, it is essential that you change the spa water first.
Do not add chemicals if the spa is occupied. This can cause skin or eye irritation.
Do not overuse chemicals or use concentrated chlorine. This can damage the spa tub and cause potential hazard to your skin. Improper chemical use
will void the warranty.
Your spa comes with a standard chemical dispenser: This dispenser only applies to 1" tablet. Do not pour liquid or granules into the dispenser.
Rotate the upper cap
counter-clockwise until two arrows
meet. Remove the cap.
DRAINAGE, CLEANING AND STORAGE
Spa Drainage
1. Turn off all the functions.
2. Connect the drain valve adaptor to a garden hose and point the other end of the garden hose to a suitable draining area.
3. Remove the drain valve cap from the outside of the spa tub and attach the drain valve adaptor to the drain valve.
4. On the inside of the spa tub, open the drain valve cap. Water will start flowing out from the garden hose.
5. When the water stops draining, lift the spa tub wall from the side opposite the drain, directing any remaining water to the drain and emptying the spa
completely.
6. Press the BUBBLE button to dry the spa pool.
7. Use a clean towel to wipe up any remaining water and moisture on the spa tub and spa control unit. Ensure the spa tub and spa control unit are
thoroughly dried.
2
3
Floating Dispenser
Put in chemical tablets. Please
refer to the package or manual
of the chemical you purchased
for proper dosage.
4
6
15
minutes
14
Rotate the upper cap
clockwise.
Adjust the dosage by rotating
the bottom cover to open or
close the dispenser holes.
5
7
BUBBLE
TIMER
UP
DOWN
Put the dispenser in the spa.
Make sure the filter pump is
running during the sanitizing
process.

Publicidad

loading

Este manual también es adecuado para:

BristolAuroraVitoU-ne022U-br062U-br082 ... Mostrar todo