Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
CAUSE
◾
The cutting
◾
line cannot be
wound into the
trimmer head
properly.
◾
◾
◾
The cutting
line cannot be
passed through
◾
the trimmer
head when
inserting the
line.
Improper cutting line is
used.
Grass debris or dirt has
accumulated in the
trimmer head and blocked
the movement of line
spool.
Motor is overheated due to
repeatedly operating the
line winding system.
Low battery charge.
The cutting line is split or
bent at the end.
The lower cover is not
released to position after
reinstalling.
STRING TRIMMER ATTACHMENT — STA1600/STA1600-FC
SOLUTION
◾
We suggest that you use EGO original
nylon cutting line, see "Recommended
Cutting Line" section in this manual. If
using EGO nylon line and the problem
persists, please call EGO customer
service for advice.
◾
Remove the battery, open the trimmer
head and clean it thoroughly.
◾
Let the string trimmer work under no
load for a few minutes to cool the motor,
then try to reload the line.
◾
Charge the battery.
◾
Cut the worn end of line and reinsert.
◾
Attach the battery pack onto the trimmer;
press the line loading button to briefly
start the power loading to reset the lower
cover.
35
Publicidad
