ROBLIN DIVA Manual De Instrucciones página 19

Mounting the hood body
• Screw the two screws 12d supplied onto the brackets
7.1.
• Hook the hood body onto the bracket 7.1, centring it
around the vertical line.
• Use the adjusting screws 12d underneath the hood to
level the hood body.
AIR OUTLET DUCTING VERSION
When installing the ducted version, connect the hood to the
chimney using either a flexible or rigid pipe the choice of
which is left to the installer.
• Insert flaps 11b on the Hood Canopy Outlet.
Connecting the ø 150 pipe
• Fix the pipe in position using sufficient pipe clamps (not
supplied).
• Remove any activated charcoal filters.
RECIRCULATION VERSION AIR OUTLET
• Push fit the air outlet fitting 15 onto the air outlet of the
hood body.
• Ensure that the activated charcoal filters have been in-
serted.
EN
Connections
12.d
7.1
15
1
19