Descargar Imprimir esta página

Lionelo Thermup 2.0 Manual De Usuario página 7

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 49
yourself – contact an authorized repair centre. If the
mains cable becomes damaged, it should be replaced
by the manufacturer to avoid danger.
12. After use, during assembly, disassembly and cleaning,
the device must be switched off and disconnected
from the power supply.
13. Keep the device away from sharp edges and sources of
heat and moisture. The device should not be exposed
to direct sunlight.
14. Do not immerse the device or the power cord in water
or other liquids.
15. Avoid overheating the device.
16. Before putting the bottle in the heater and pouring in
the water, make sure it is firmly capped.
17. Make sure there is water in the device before switching it
on. Never switch on the device if there is no water in it.
18. Hot water can cause severe burns. If there is hot water
in the device, handle it with care.
19. When exposed to hot water, the surface of the device
can become hot. It is important to remain cautious.
20. When the heated food has reached the desired
temperature, remove the bottle from the heater. Do
not heat the food for too long.
21. Always check the temperature of the food before
giving it to the baby.
‑ 7 ‑
EN

Publicidad

loading

Este manual también es adecuado para:

Loc-thermup 2.0