Lionelo Thermup 2.0 Manual De Usuario página 9

1.
Place the bottle or food container in the heater (fig. 1).
2.
Fill the heater with 80 ml of distilled water (fig. 2).
3.
In the display, select the Fast defrost/quick warm-up function (fig. 3). Wait until the indicator
light comes on.
NOTE
Due to the high variety of textures of baby food, frequent mixing and controlling the temperature
of the food being defrosted is recommended.
Do not give milk/food to your child immediately after defrosting.
Frozen milk or food should not be heated. Milk or food can be reheated after defrosting.
Specifics of the operating mode
Initial temper-
Bottle type
Glass
Plastic
Milk warming function
The heating time can vary depending on the amount of milk or water and the initial temperature.
1.
Place the milk or water bottle in the heater (fig. 1).
2.
Fill the heater with 80 ml of distilled water (fig. 2).
3.
In the display, select the Milk heating function (fig. 4). Wait until the indicator light comes on.
4. Select the temperature using the increase and decrease buttons of the selected value
(2, 3, fig. B). The temperature range for this function is 37 - 60°C. The display shows the
current fluid temperature.
NOTE
It is advisable to give the milk to the baby immediately after heating. Reheating the milk should
be avoided.
Always check the temperature of the milk before giving it to the baby (fig. 5).
Quick warm-up
Amount of
-ature water
4°C
20°C
80 ml
4°C
20°C
60 ml 120 ml
3 min 4 min
2,5 min 3 min
3 min 4,5 min
2,5 min 3,5 min
‑ 9 ‑
Amount of milk
180 ml
5 min
4 min
6 min
4,5 min
240 ml
6 min
4,5 min
7 min
5 min
EN