Publicidad
Idiomas disponibles
Idiomas disponibles
GB
2. Place your selected nozzle, turbo dirt
miller (16) or standard Vario nozzle
(17) on the lance (12).
You will hear the nozzle click into place.
Removing attachments:
1. Remove the lance (12) or the foam
nozzle (15) by simultaneously press-
ing and turning ⭮ (bayonet lock) the
high-pressure gun (1).
2. Press the lock (18) on the front end of
the lance (12) and remove the nozzle.
Operation
If there is a leak in the water
system, switch off the device im-
mediately with the On/off switch
(10) and disconnect it from the
mains.
Risk of electric shock! Try con-
necting the water again, see
"Connecting the garden hose".
The device may only be operated
in an upright position! There is
a risk of an electric shock if the
device falls over. Switch off the
device immediately with the On/
off switch (10) and unplug the
mains plug (6). Only now may
you bring the device into the
upright position. For your own
safety, wait about five minutes
until you restore the electrical
connection.
Unsuitable extension cables can
be dangerous! Use only exten-
sion cables that are designed
for outdoor use. The connection
must be dry and routed above
the ground. We recommend us-
26
ing a cable drum that holds the
socket at least 60 mm above the
ground.
Be aware of the recoil force
when the water jet commences.
Make sure you are standing and
holding the high-pressure gun (1)
firmly. Otherwise there is a risk of
injuring yourself or other people.
Do not operate the device with
the tap turned off. Dry running will
damage the device.
1. Put the device in an upright position.
2. Ensure that the On/off switch (10) is in
the "O" (OFF) position.
3. Insert the mains plug into an earthed
socket with a residual current circuitry.
4. Turn on the tap fully.
5. Using the On/off switch (10), turn the
device to position "I" (ON).
Do not switch on the device until you have
connected all of the water pipes and the
connections are tight.
The motor switches on until the necessary
pressure has built up. Once the pressure
has built up, the motor switches off.
6. Unlock the switch lever (20), see "Lock-
ing the high-pressure gun".
7. Press the switch lever (20) of the high-
pressure gun (1).
The nozzle works with pressure and the
motor switches back on.
Releasing the switch lever switches off the
motor. The high pressure is maintained in
the system.
Interrupting the operation
1. Release the switch lever (20) of the
high-pressure gun (1).
Publicidad
