Descargar Imprimir esta página

Deltafox DC-HPW 1511 Traducción Del Manual De Instrucciones Original página 29

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 116
GB
After working with cleaning agents:
1. Lock the switch lever (20), see "Lock-
ing the high-pressure gun".
2. Unscrew the cleaning agent tank from
the foam nozzle (15).
3. Pour the cleaning agent back into the
cleaning agent bottle.
4. Rinse out the cleaning agent tank.
5. Unlock the switch lever (20), see "Lock-
ing the high-pressure gun".
6. Press the switch lever (20) of the high-
pressure gun (1) and rinse out the
foam nozzle (15) with water.
7. Follow steps 1-8 under "Releasing
pressure from the device".
8. Screw the cleaning agent tank onto
the foam nozzle (15)
9. Remove the foam nozzle (15) from the
high-pressure gun (1), see „Fitting and
removing attachments".
Cleaning and
Maintenance
Pull out the power plug before
every maintenance operation. This
also includes connecting to the
water supply or trying to eliminate
leaks. There is a risk of electrocu-
tion or of injury from moving parts.
Cleaning
Never direct the water jet
against the washer, nor clean
the washer under flowing water.
This could give rise to the dan-
ger of electric shock and dam-
age the washer! .
Always keep the washer clean. Do not
use any detergents or solvents.
28
Always keep the ventilation slots clean
and free.
Only clean the pressure washer with a
soft brush or a slightly moist cloth.
In case a nozzle of the jet tube (17/18)
is clogged up, use the nozzle cleaning
pin (20) to remove the object from the
nozzle.
Maintenance
The pressure washer is maintenance free.
Ask our service centre to carry
out any work that is not de-
scribed in these instructions.
Use only original parts.
Storage
1. Disconnect the device from the water
supply.
Completely empty the water from the de-
vice.
2. Turn on the pressure washer with the
On/off switch (10) for a maximum of
1 minute until there is no more wa-
ter coming out of the high-pressure
gun (1).
3. Turn off the device.
4. Remove the high-pressure hose (3).
5. Empty the high-pressure hose.
6. Store all attachments upright in the
holder/storage area (24) with the con-
nection facing downwards.
The device and accessories are de-
stroyed by frost if they are not com-
pletely emptied of water.
Store the device and the accessories
in a frost-resistant location.

Publicidad

loading