Publicidad
Idiomas disponibles
Idiomas disponibles
Adapter Part Number
Manufacturer
Model
Technical Spec. (AH)
Battery Watt/hr
Battery Models
Battery Certification
Battery Charger Models
Battery Charger Certification
WARNING: Battery requirements: The
batteries (Lithium-ion Battery Packs) used with
this machine must be certified products that
comply with local safety regulations.
WARNING: Charger requirements: Please
use only the charger specified by the battery
manufacturer for charging. Charging with
another battery pack may cause a fire hazard.
WARNING: Do not ignite or overheat the
battery or equipment, it may cause an explosion
if it catches fire or is higher than the battery's
required limit temperature.
WARNING: It is strictly prohibited to use
damaged or illegally modified batteries for this
machine as a power source, which may cause
fire, explosion, personal injury, property damage
and other hazards.
NOTE:
1. This product will not charge the battery.
Please remove the battery after using the
product. If you do not use it for a long time,
you need to charge the battery regularly to
avoid affecting the battery life.
2. If the existing battery cannot be installed with
the device, please check Local after-sales
solution.
DEWALT
, Milwaukee
®
© 2021 Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
BATTERY OPERATION INSTRUCTIONS
ASM-00040
DEWALT
®
20V Max. & FlexVolt, 18V
4-12
80-240
DCB080, DCB200, DCB201, DCB203BT,
DCB203G, DCB204, DCB204BT,
DCB205, DCB8205G, DCB206, DCB207,
DCB208, DCB210, DCB230, DCB240,
DCB404, DCB406, DCB609, DCB612
UL
DCB1106, DCB1112
UL
, BLACK+DECKER
, Makita
, and Mastercraft
®
®
®
s not associated, affiliated, licensed, or endorsed by DEWALT
WHILE CONNECTED TO A POWER SOURCE
ASM-00040
Milwaukee
®
M18
4-12
72-216
48-11-1815, 48-11-1820,
48-11-1828, 48-11-1835,
48-11-1840, 48-11-1845,
48-11-1850, 48-11-1860,
48-11-1865, 48-11-1860,
48-11-1890, 48-11-1812
UL
48-59-1811, 48-59-1810,
48-59-1802
UL
Figure 1
Battery Voltage
Battery Pack Amp Hour
Estimated Run Time (Hour)
NOTE: Actual run time may vary due to battery condition and ambient temperature.
If you intend to use a Milwaukee
replace the battery connection terminals.
1. Make sure heater is not plugged into a power source.
2. Locate terminals within the battery connection port. (See
Figure 1)
3. Using a Phillips screwdriver, unscrew the screws
holding in current terminals by turning the screws
counterclockwise.
4. Replace terminals with terminals provided in the bag.
(See Figure 2)
5. Be sure to tighten screws to ensure a good connection.
are registered trademarks of their respective owners. Pinnacle Climate Technologies, Inc.
®
, Milwaukee
, BLACK+DECKER
®
®
7
Kerosene Forced Air Heater User's Manual
ASM-00038
ASM-00039
BLACK+DECKER
Makita
®
20V Max.
18V
4-12
4-12
80-240
72-216
BL1815N, BL1820B,
LBXR36, LBX1540,
BL1830, BL1830B,
LBXR2036, LBX2040,
BL1840B, BL1850B,
LBX2540
BL1860B
UL
UL
DC18RC, DC18RA,
BDCA202
DC18SD
UL
UL
Figure 2
Battery Run Time Estimated
4
5
1.7
2.1
battery you will have to
®
, Makita
, and Mastercraft
.
®
®
®
ASM-00071
Mastercraft
®
®
20V Max.
4-12
80-240
054-3124-0
054-7553-4
054-7557-6
UL
054-3126-6
UL
18/20
6
8
9
12
2.6
3.4
3.9
5.1
Publicidad
