Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Before calling for service, check the following items yourself.
Problem
The appliance does not operate.
Room humidity does not go
down.
The appliance operates with loud
noise.
Water is leaked or spilled.
Error and protection codes
Code
Description
AS
Humidity sensor error
ES
Temperature sensor error
E3
Appliance malfunction
P1
The appliance is defrosting.
P2
Bucket is full or bucket is not
in right position.
SPECIFICATIONS
Capacity
(The maximum operation
ambient DB=30°C, the
relativity humidity RH=80%)
Excessive operating pressure
Weight
Power source
Refrigerant
Rated currnt
Rated input
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur
as a result of product improvement and development.
Check that the appliance is plugged into the mains socket.
Check that the fuse/circuit breaker box.
Check that the appliance has reached the set humidity level or
the bucker is full.
Check that the bucket is placed in place.
Check that all doors or windows are closed or not opened too
often.
Check that the room temperature is higher than 5°C.
Check that there is no kerosense heater or other device giving off
water vapour in the room.
Check that the filter is not clogged.
Check that the appliance is not tilted.
Check that the floor surface where the appliance is placed is
stable and level.
Check that the rubber plug is inserted into the drain outlet when
using the bucket to collect water.
Check that the hose is connected properly to the drain outlet
when using the continuous external draining facility.
Unplug the appliance and plug it back in. If this error
repeats, call for service.
Allow the appliance to automatically defrost. The
protection will clear after the appliance defrosts.
Empty the bucket or replace it in place.
10L / DAY
Discharge : 1.7 MPa
Suction: 0.7 MPa
11.5 kg
220-240V~ 50Hz, 1Ph
R134a/110g
1.57A
285W
What to check
Possible Solution
Darty Plc © UK: EC1N 6TE 30 / 05 / 2014
GB10
Publicidad
