Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Air Conditioner - Controls
Appearance may vary.
1. POWER
Turns air conditioner on and off.
2. Display
Displays the temperature setting. Displays hours when
setting the timer.
3. Mode
COOL, HEAT (on some models), DRY,
AUTO, or FAN modes. Indicator lights on the controls
will show the mode selected.
4. Temp Increase + / Decrease - Pads
HEAT (on some models) mode.
5. Fan Speed
Indicator lights will show the speed selected.
To ensure proper operation, aim the remote control at
the signal receiver on the air conditioner.
The remote control signal has a range up to 21 feet.
49-5000712 Rev. 1
Air Conditioner Controls
Lights above the touch pads on the air conditioner
control panel indicate the selected settings.
AUTO, COOL, DRY or
LOW, MEDIUM, or HIGH.
Remote Control
Temp/Timer
6. Timer
ON
ON from 0.5 to 24 hours later.
OFF
OFF from 0.5 to 24 hours later.
7. Filter
Monitors accumulated fan run time as a reminder to
clean the filter.
8. Eco
ON:
cycles off.
OFF:
or heating (on some models) mode.
9. Sleep
Allows room temperature to increase (Cool mode) or
decrease (Heat mode) during sleeping hours.
Make sure nothing is between the air conditioner and
the remote control that could block the signal.
Make sure the battery is fresh and installed correctly—
see the Care and Cleaning section.
5
Publicidad
