Trust 18066 Guía De Instalación Rápida página 4

Bluetooth Audio Headset - USER'S MANUAL
Installation
A Battery LED indicator
1
B Power button
C Volume control
D USB power connection
E Bluetooth status LED: Blue 3x every sec.
Blue 1x every 2sec.
F USB charge cable
- Connect USB cable to headset and a USB port of your computer or laptop.
2
- The battery LED indicator will light red when charging.
- If the headset is fully charged the battery LED indicator will go off.
3
- Press and hold the power button on for 8sec until the LED light starts blinking fast (paring mode).
To power off the headset. Press and hold the power button for 3sec.
If a passcode is requested during the configuration of the device Use '0000'.
The headset can also be used during charging.
Standard Configuration
iPad/ iPhone
- Go to 'Settings'.
4
- Go to the 'General' settings.
- Go to 'Bluetooth'.
- Make sure that Bluetooth is on.
5
- Select 'Trust BT Headset' in the list of Bluetooth devices (make sure the headset is in pairing mode).
When the device status is 'paired', your device is ready to use.
Android
Go to 'Settings'.
6
Go to 'Wireless and network'.
7
Go to 'Bluetooth settings' and press 'find nearby devices' if needed.
8
9 Select 'Trust BT Headset' in the list of Bluetooth devices (make sure the headset is in pairing mode).
10
Press and hold 'Trust BT Headset' to go to the options menu of the wireless audio device.
11 - Make sure that the device is 'Connected'.
- For listening to music make sure that the 'Media' profile is enabled.
- For making phone calls make sure that the 'Phone' profile is enabled.
Your device is ready to use.
Pairing mode
Connected.
2