Zeegma Zonder Robo Next Manual De Usuario página 10

4a. How to install the water tank:
EN
Description of parts (see fig. 5)
How to use the water tank (see fig. 11 )
1.
Open the tank and pour water into the water inlet hole.
2.
Close the water tank and fix the mop on the dedicated external surface.
3.
Fix the water tank and dustbin and install in the cleaner.
4.
Press the start/pause key to make the cleaner start wet-cleaning.
How to clean and empty the water tank and mop (see fig. 12):
1.
Remove the water tank.
2.
Pour water out of the tank.
3.
Remove the mop.
4.
Clean the water tank.
5.
Clean and dry the mop.
6.
Dry the water tank.
5. How to clean the dustbin and filters (see fig. 13):
1.
Press the dustbin open key to remove the bin.
2.
Remove the bin and open the side cover for emptying the dustbin.
3.
Empty the dustbin, dispose of rubbish into a rubbish bin.
4.
Open the cover and remove HEPA filter and preliminary filter.
5.
It is not advisable to wash HEPA filter under running water, gently remove dust.
6.
Wash the preliminary filter under running water.
7.
Next you can clean the interior with a wet cloth.
8.
Do not wash the entire dustbin under running water.
9.
Dry the bin and filter before another use. Do not expose filters to direct sunlight.
10.
Wash the preliminary filter every 15-30 days, the life of HEPA filter is about 3 months.
Make sure the filters are dry before you reinstall them.
6. How to clean side brushes and central brush (see fig. 14):
1.
To remove the central brush, remove the cover and brush.
2.
Use the cleaning brush to remove remains on the brush.
3.
Detach side brushes and wipe with a dry cloth.
7. How to clean sensors and wheels (see fig. 15):
•
Clean a charging port of the docking station, all sensors, central wheel and side wheels
with a dry cloth.