Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Make sure that the battery is not damaged.
Make sure that the battery is charged.
Make sure that the battery charger is not damaged.
Examine all cables, couplings and connections. Make sure they are not dam-
aged and free from dirt.
Do a check of the connections between the battery and the product. Do a check
of the connection between the battery and the battery charger.
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery and the
battery charger are clean before the battery is put in
the battery charger or the product.
To check the bevel gear
The bevel gear is filled with the right quantity of grease
at the factory. The grease in the bevel gear does not
normally need to be changed except if repairs are
carried out.
•
Before using the product check that the bevel gear is
filled to ¾ with grease. Fill if necessary using special
grease.
a) For model 525iECS:
1847 - 001 - 28.11.2022
b) For model 525iES:
To lubricate the flexible drive shaft
Only for model 525iECS.
1. Loosen the 2 screws on the bevel gear.
2. Remove the bevel gear.
3. Take a firm grip on the hollow shaft (A) and remove
the flexible drive shaft (B) from the opposite end of
the gear box.
Note:
The bushing (C) will fall off when you
remove the flexible driveshaft. Make sure that you
do not lose it. Put the bushing safely aside.
4. Lubricate the entire length of the flexible drive shaft.
5. Reinsert the flexible driveshaft in the hollow shaft.
Turn the flexible driveshaft while inserting it so that it
correctly engages in the bevel gear.
6. Attach the bushing on the flexible drive shaft.
7. Attach the bevel gear on the hollow drive shaft and
tighten the 2 screws.
Daily
Weekly
Monthly
X
X
X
X
A
C
X
B
17
Publicidad
