Husqvarna FS 305 Manual De Usuario página 13

• Stay away from the blade path while the engine
is on. The correct operator position is behind the
handles with both hands on the handles.
• Examine the cutting blade frequently for cracks and
broken parts during the work day. Do not use a
damaged cutting blade.
WARNING:
you examine the cutting blade.
• Do not grind with the side of the cutting blade. The
cutting blade can break and cause injury to the
operator or bystanders. Only use the cutting edge.
• Do not bend or twist the cutting blade in the cut.
• Make sure that the cutting blade moves freely and
does not catch in the cut.
• If you are to cut concrete bricks, tightly attach the
concrete bricks before you cut. The heavy weight
of the material can cause damage to the product
and serious injury. Make sure that you can move the
product in controlled conditions.
To start the product
WARNING:
blade is slightly above the ground.
• Refer to the operator's manual supplied by the
engine manufacturer.
1919 - 002 - 23.01.2023
Stop the engine before
Make sure that the cutting
To stop the operation
1. Turn the cutting depth wheel (K) clockwise to fully lift
the cutting blade.
2. Stop the water supply (G).
To stop the product
WARNING:
push the machine stop button to stop the
product quickly.
WARNING:
for a while after the engine stops.
• Turn the engine ON/OFF switch to the OFF position.
Refer to the operator's manual supplied by the
engine manufacturer.
To operate the product
1. Slowly turn the cutting depth wheel counterclockwise
to lower the cutting blade.
2. Make a cut as a guide, approximately 20-30 mm.
3. Do cut increments of 50 mm until you get the
necessary depth. Push the lever up to lock the
cutting depth wheel.
4. Adjust the water supply when you operate the
product. Turn the water tap to adjust the water
supply.
CAUTION:
blade must have sufficient supply of
water to cool down the cutting blade.
The water also prevents dust buildup.
5. Cut only in a line, align the cutting blade with the
marks.
If there is an emergency,
The cutting blade rotates
Each side of the cutting
13