Husqvarna FS 305 Manual De Usuario página 5

Rating plate
2
1
4
6
7
8
1. CE marking
2. Manufacturer
3. Manufacturer address
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
Safety instructions for operation
WARNING:
instructions that follow before you use the
product.
• Read the warning instructions that are supplied with
the cutting blade by the cutting blade manufacturer.
• Make sure that the product is assembled correctly.
• Do not operate the product without the blade guard
and the protective covers installed.
• Do not operate the product with the front of the blade
guard lifted or opened. The blade guard must be
lowered and correctly attached.
1919 - 002 - 23.01.2023
9
5
10
Used if there is a risk of
Used if there is a risk of
Read the warning
4. Type designation
5. Serial number
6. Product weight, kg
7. Maximum blade diameter, mm
3
8. Maximum blade shaft speed, rpm
9. Product number
10. Maximum power input, kW
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
Safety
• Incorrect operation of the product can cause the
cutting blade to break and cause injury or damage.
• Make sure that you know how to stop the engine
quickly in an emergency.
• Use personal protective equipment. Refer to
Personal protective equipment on page 6 .
• Make sure that only approved persons are in the
work area.
• Make sure that electrical cables in the work area are
not live.
• Before you operate the product, find out if there are
hidden wires, cables and pipes in the work area.
If the product hits a hidden object, stop the engine
immediately and examine the product and the object.
Do not start to operate the product again until you
know that it is safe to continue.
• Do not use the product in bad weather conditions,
such as thick fog, heavy rain, strong wind or intense
cold. To do work in bad weather makes you tired
and can cause dangerous conditions, for example
slippery surfaces.
• Make sure that you are in a safe and stable position
during operation.
• The product can cause objects to eject at high
speed. Make sure that all persons in the work
area use approved personal protective equipment.
Remove loose objects from the work area.
• The exhaust fumes from the engine contain carbon
monoxide which is an odourless, poisonous and
very dangerous gas. Do not use a combustion
engine product indoors or in areas that do not have
sufficient airflow.
• Before you go away from the product, stop the
engine and make sure that there is no risk of
accidental start.
5