Publicidad
Idiomas disponibles
Idiomas disponibles
Tilting the shade
You can tilt the shade. Prerequisite: The
shade has been opened completely.
There are 2 versions of the tilting mechanism:
Ver sion 1:
•
Slide the metal sleeve c up and tilt the
shade pole (see figure G + H).
Ver sion 2:
•
Push the button d and tilt the shade pole
(see figure G + H).
Closing the shade
The shade must be closed in the event of in-
coming wind, rain or snow.
Ver sion 1:
1. Position the shade pole so that it is straight
and slide the metal sleeve c down over the
joint e (see figure I).
2. Push the button f and let the push handle
slide down (see figure J + K).
Ver sion 2:
1. Push the button d and position the shade
pole so that it is straight (see figure I).
2. Push the button f and let the push handle
slide down (see figure J + K).
Cleaning the cover
The cover has a stain-resistant impregnation.
In order to clean it, ideally use a soft brush
and a small amount of soapy solution.
For the model Active 180x120, you can re-
move the cover of the frame:
1. Close the shade (see figure J + K).
2. Pull the cover pockets off of the brace
ends (see figure L).
3. Screw the head plate g on the top end of
the shade off (see figure L) and pull off the
cover.
4. Attention! The cover is not suitable for
machine washing!
Hand wash the fabric at 40 °C. Do not put
it in the dryer, do not iron and do not dry
clean it.
5. Put the wet cover back on and tighten the
head plate g.
6. Open the shade and let the cover dry thor-
oughly.
7. If necessary, close the shade and attach
the protective sleeve.
Care + storage
Clean the shade pole regularly to ensure that
the mobile parts slide properly. If necessary
spray with a silicon or Teflon lubricant spray.
Check all load-bearing parts such as braces,
screws etc. regularly.
Over winter, dismantle the sunshade and
store it in a dry, well-ventilated area.
At the start of the season ensure that all com-
ponents and fixings are secure. If you are un-
sure, do not use the product.
War rant y
The warranty period for this product is 36
months.
If you discover a defect during this time,
please consult your vendor. To ensure that the
vendor is able to promptly assist you, please
have your sales slip ready and specify the
model name and product number.
The warranty does not cover:
– Normal wear and discolouration of the tex-
tile cover
– Damage to the paint due to normal wear
– Damage due to improper use (e.g. com-
mercial use)
– Damages caused by wind, overwinding
the crank, the shade falling over, exces-
sive pulling on the shade braces
– Damages caused by structural changes to
the product
GB
9
Publicidad
