Craftmade LC52 Instrucciones De Instalación página 5

Step 8
fan wires to ceiling wires: white fan wire to white outlet wire,
ck and green to green. Wire connectors (S6) are provided for
ience. If an additional blue wire is present then also connect the
the black wire. (Optional light kit may be wired to individual
s, if desired.)
nections
Ground
rn
rd
White (Neutral)
refully
box.
Black (Power)
e and
on one
ox, and
reen wires
side.
White
Black
colored
g from the
Blue
motor
round wire).
re Connnections
x Fan wires
Black
(Hot wire for fan)
Green
(Ground wire)
White
(Neutral wire)
Blue
(Light kit wire)
All manuals and user guides at all-guides.com
9
Attach canopy (3) to the
mounting bracket by placing
screws (S2) into slot in canopy.
Twist clockwise to lock
into place. Tighten screws firmly.
Wire
Connectors
(S6)
Ground
(Green)
10
For blade assembly, position blade arm (6), blade (7) so that all screw holes
are aligned (as shown in figure below). Using blade screws (S4), insert
Outlet Box
through top of blade holder, through blade, and into blade ornament.
Ground (Green)
Tighten securely.
Downrod Ground
(Green)
Mounting Bracket
Ground (Green)
Step 9
Step 10
Motor
Screws (S5)
CAUTION:
Install blade holders to motor only after motor installation is complete. This will
prevent damage to the blade holders which have been carefully balanced.
IMPORTANT: Remove rubber cushions, saving motor screws for installation.
Ceiling
Canopy (3)
Screws (S2)
Bottom of Canopy
Blade Screws (S4)
Blade (7)
Blade Arm (6)