Publicidad
Idiomas disponibles
Idiomas disponibles
Optional Light Kit Installation
ee screws from side of switch hub (as shown in figure below).
b cover from hub and pop out center plug. Carefully thread
ight kit through the center hole in hub cover. At this point
kit into hub cover by screwing center all-thread from light kit
ter hub cover. Lock the all-thread in place on the inside of the
he 3/8" nut provided. Attach white wire from light kit to white
using wire nuts. Next, attach black wire from light kit to blue
ch hub. Carefully push wires up into hub and replace hub cover
removed earlier.
s
w
All manuals and user guides at all-guides.com
Switch Hub
Center Hole
Remove Finial
14
Operation Instructions
1. The sequence of operation for the motor pull/chain switch is OFF-HI-
MED-LOW.
2. Push the slide switch RIGHT for FORWARD, and LEFT for REVERSE
action of the blades.
3. The pull chain switch for the lighting is two positions - ON/OFF.
4. The pull chain switch for the uplighting is on/off.
Slide Switch
Side Light Pull Chain
CAUTION: Even if your fan is mounted with the blades more than 7 feet from the floor,
be careful to avoid placing your raised arms or any object in the path of the blades.
Motor Pull Chain
Light Pull Chain
Publicidad
