Rio SKIN RENEW Manual De Instrucciones página 7

F I T TI N G TH E FI LT ER AND
TR E ATM E NT H EADS
1. The filter should be fitted into the vacuum nozzle before the treatment
head is attached. Check the small "O" ring is in place before fitting
(spare "O" rings are provided).
2. The treatment heads are a "push fit" onto the main unit. Check that the
two large "O" rings are in place before fitting the treatment head.
1 ­ ­ ­ ­
£
$
HOW TO US E
• Cleanse and dry skin before use.
• Select your preferred head and press firmly onto the unit.
• Press the ON/OFF button for three seconds to switch on.
• To select between the 3 intensity levels briefly press the ON/OFF button.
MICR ODERMAB RAS I ON
Select one of the Microdermabrasion Heads.
Important: Test on a small area on each power level to check for skin
sensitivity. Wait for 24 hours to check for any reaction.
9
• Only use on an intensity level that suits your skin type.
• Starting at the jaw line, move the head in upwards and outwards
diagonal strokes.
• Place on the cheeks and move outwards.
• Place on the forehead and move sideways.
• For the t-zone glide the head up and down.
7