LG LRSDS2706 Serie Manual Del Propietário página 11

Dimensions and Clearances
• Check the dimensions of the appliance and the installation path to ensure there is sufficient room to
move the refrigerator through doors or narrow openings.
• If an opening is too narrow to fit the refrigerator through, remove the refrigerator doors. See Removing/
Assembling the Doors and Drawers in this manual.
• The installation location chosen for the refrigerator should allow space behind the unit for connections
and airflow and space in front to open the doors and drawers.
• Too small of a distance from adjacent items may result in lowered freezing capability and increased
electricity consumption charges. Allow at least 2 inches (50 mm) between the back of the refrigerator
and the wall.
• Remember to allow enough room in front of the refrigerator to fully open the doors and drawers.
-
A Depth
B Width
C Height to Top of Case
D Height to Top of Hinge
E Back Clearance
F Depth without Door
G Depth (Total with Door Open 90°)
Removing/Assembling
Doors
If the entrance door is too narrow for the
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
B
A
D
C
Dimension/Clearance
E
F G
LRSDS2706*,
LRSXS2706*,
LRSOS2706*,
LRSVS2706*,
LHSXS2706*,
LRSWS2806*,
LLSDS2706*
33 7/16" (850 mm)
35 7/8" (912 mm)
68 7/8" (1750 mm)
70 1/2" (1790 mm)
2" (50 mm)
28 7/8" (735 mm)
51" (1295 mm)
CAUTION
• Use two or more people to remove and install
the refrigerator doors.
• Disconnect the electrical supply to the
refrigerator before installing.
• Do not put hands, feet or other objects into the
air vents or bottom of the refrigerator.
• Be careful when handling the hinge and hinge
lever.
INSTALLATION 11
LRSOC2306*,
LRSXC2306*
28 15/16" (735 mm)
35 7/8" (912 mm)
68 7/8" (1750 mm)
70 1/2" (1790 mm)
2" (50 mm)
24 3/8" (620 mm)
46 1/2" (1180 mm)