LG LRSDS2706 Serie Manual Del Propietário página 12

12 INSTALLATION
CAUTION
• Remove food and bins before detaching the
doors.
• Do not hold the handle when removing or
replacing the doors as the handle may come off.
• Tools Needed
- Flat-head screwdriver
- Phillips screwdriver
Removing the Hinge Cover
Remove the screws from the hinge cover at the top
of the refrigerator. Lift the hook (not visible),
located at the bottom of the front side of the cover
with a flat-head screwdriver.
Removing the Freezer Door
1
The water supply is connected to the upper
right part of the rear surface of the
refrigerator. Remove the clip in the joint area.
Hold the water supply connection and gently
push the collet
a
line as shown.
NOTE
• Disassembling/Assembling the Water Lines
Collet Tube
b c d
to detach the water supply
Insert line Clip
e
2
Remove the screws from the water line cover
and detach the cover.
f
3
Pull out the water supply lines
all the wire harnesses
wire .
i
NOTE
• The number of wire harnesses may vary
depending on the model.
• Ground wire is only present on some models.
4
Rotate the hinge lever
Lift the top hinge
latch .
l
CAUTION
• When lifting the hinge free of the latch, be
careful that the door does not fall forward.
5
Free the hinge from the water lines and wire
harnesses and set it aside.
. Disconnect
g
. Unscrew the ground
h
counterclockwise.
j
free of the hinge lever
k