Publicidad
Idiomas disponibles
Idiomas disponibles
Operating manual
EP 200-DS / EP 300-DS / EP 400-DS
1
Safety instructions
1
1)
Attention! Read assembly instructions before use.
2)
Warning! Disconnect the power supply, remove the plug.
3)
Warning! Wear gloves during use.
4)
Warning! Danger from spraying oil, use safety glasses.
5)
Take note, e.g. never point pressure hose at people or animals.
6)
Environmentally friendly disposal.
Failure to comply with the safety instructions may result in the endangering of people as well
as the environment and the facility. Failure to comply with the safety instructions may lead to
loss of any claims for damages. The operator of the facility must ensure that the contents of
the manual, especially the safety instructions for the operators, are known. The operating
personnel must be provided with suitable instruction on a regular basis.
Instructions for EP 200-DS, EP 300-DS, EP 400-DS:
When the facility is inactive for prolonged periods (e.g. time off over the weekend), the electric
-
gear pump must be disconnected from the mains. Switch off pump at the on/off switch and pull out
the plug.
The installation must not be operated in potentially explosive areas.
-
Viscous media of Hazard Classes A1 and A2 cannot be used.
-
Ensure that the 220V power socket is secured with at least 10 A.
-
Ensure that you have a secure grip on the pump.
-
Only use original accessories approved by MATO. Liability cannot be accepted in case of
-
accidents caused by foreign parts.
The reliability of the system is only guaranteed when used as intended.
-
Trace return hose back to the safety valve (9) of the tank.
-
Tampering or changes to the safety valve (9) are prohibited.
-
In combination with drum and carriage, operate parking brake when parking.
-
Preparatory measures / handling
Protective gloves made of leather and goggles must be worn during use.
−
Observe safety data sheets for hazardous substances (oil, diesel) used. Instruct employees on a
−
regular basis.
Do not bend pressure hose sharply.
−
Installation in general is only to be operated under supervision in order to prevent containers
−
overflowing or the oil filler gun from slipping out.
Repair / maintenance
Before carrying out any repair or maintenance work, break off the power supply (unplug mains
−
plug) and relieve pressure on the system by opening the oil filler gun.
/ Benzstr. 16-24 / 63165 Mühlheim a. Main / Tel:+49(0)6108-906-0 / Fax:+49(0)6108-906-120
GmbH & Co. KG
MATO
EP 200-DS, EP 300-DS, EP 400-DS:
2
3
4
5
6
9
Publicidad
