IMPORTANT:
Be sure to read the separately enclosed safety instructions first.
Instruction Manual
Thank you for choosing our product. We hope you will enjoy
using the appliance.
Read the instruction manual and the separately enclosed
safety instructions very carefully before using this appliance.
Keep these documents, including the warranty certificate,
receipt and, if possible, the box with the inner packaging in
a safe place. If you pass the appliance on to a third party,
always include all the relevant documents.
Symbols in this Instruction Manual
Important information for your safety is specially marked.
It is essential to comply with these instructions in order to
avoid accidents and prevent damage to the appliance:
WARNING:
This warns you of dangers to your health and indicates
possible injury risks.
CAUTION:
This refers to possible hazards to the appliance or other
objects.
Unpacking the Appliance
1. Remove the appliance from its packaging.
2. Remove all packaging material, such as foils, filling
material, cable ties and cardboard packaging.
3. Check the scope of delivery for completeness.
4. If the contents of the packaging are incomplete or if
damage can be detected, do not operate the appliance.
Return it to the dealer immediately.
5. There may still be dust or production residues on the
appliance. We recommend that you clean the appliance
as described under "Cleaning".
Overview of the Components /
Scope of Delivery
1 Spout
2 Contact area for closing the lid
3 Lid
4 Button for opening the lid
5 Handle
6 Display
7
button
8 Base
9
button
8
PC-WKS1243_IM
Not shown:
Water level display in the interior
Warnings for the Use of the Appliance
WARNING: Risk of Burns!
• Do not open the lid while the water is boiling.
• Always make sure that the lid is firmly closed.
• The appliance housing becomes hot during operation,
do not touch it and allow the appliance to cool down
before putting it away.
CAUTION: Overload!
• If you use extension cables, they should have a cable
cross-section of at least 1.5 mm².
• Do not use a multiple socket as this appliance is too
powerful.
CAUTION:
Always switch off the appliance before removing it from
the base! The contacts on the base are not suitable for
disconnecting the power supply.
Notes for Use
Mains Cable
Unwind the required mains cable completely from the base
part of the base. Please pay attention to the routing of the
mains cable.
Connected Load
In total, the appliance can handle a power of 2200 W. With
this connected load, a separate supply line with a fuse
protection via a 16 A household circuit breaker is recom-
mended.
Electrical Connection
1. Check that the mains voltage you want to use matches
that of the appliance. You will find the information on the
type plate of the base.
2. Only connect the appliance to a properly installed protec-
tive contact socket. A signal sounds and the current wa-
ter temperature is displayed for 5 minutes. The appliance
then switches to standby mode.
Function Buttons
The buttons on the appliance are touch keys. Gently touch
the buttons with a finger to execute the function. Whenever
a button is pressed, it will be confirmed by a beep sound.
28.07.22