Profi Cook PC-WKS 1243 Manual De Instrucciones página 9

Programmes
Select the desired programme with the
Function Display Indicator
Heating + M 1 50 °C
keeping warm (flashes 5 minutes)
Heating + M 2 70 °C
keeping warm (flashes 5 minutes)
Heating + M 3 80 °C
keeping warm (flashes 5 minutes)
Cooking BOIL flashes for approx. 150 seconds
Preparation
Before using the appliance for the first time, boil it 3 times
with fresh water. Use only clear water without additives.
Use
1. Place the appliance on a flat surface.
2. Press the button on the handle to open the kettle.
3. Fill in clear water through the filler opening (maximum
1.7 litres). You can read the fill level on the water level
indicator inside the appliance.
- Always use fresh, cold water.
- The water level must be between the MIN and MAX
marks.
4. Close the lid. Always make sure that the lid is firmly
closed.
5. Place the kettle flush on the base.
WARNING:
• Always switch off the appliance and disconnect the mains plug
from the socket before cleaning. Wait until the appliance has
cooled down.
• Do not immerse the appliance or the base in water or other liq-
uids. It could cause an electric shock or fire.
CAUTION:
• Do not use a wire brush or other abrasive objects.
• Do not use sharp or abrasive cleaning agents.
• Clean the perforated area of the spout from the inside
with a nylon brush.
• Rinse the water reservoir with clean water. Dry it with a
cloth.
• Clean the housing with a slightly damp cloth after use.
PC-WKS1243_IM
Operation
button.
Quick Start:
6. Press the
Programme Selection:
WARM (flashes
10 seconds) 7. Select a desired programme with the
8. Start the programme with the
WARM (flashes
programme lights up permanently.
10 seconds)
- When the temperature is reached, a signal sounds.
WARM (flashes
- The WARM indicator in the display lights up. The ap-
10 seconds)
Interrupting / Ending Operation
There are two ways to interrupt or end the cooking process:
1. The appliance switches off automatically after the cook-
ing process.
2. To end or interrupt the cooking process prematurely,
press the
- Always switch off the appliance before removing
• Unplug the mains plug from the socket.
• Empty the water container.
- Only hold the appliance by the handle.
- Keep the lid closed when pouring out.
- Open the lid only with the button on the handle.
- Close the lid by only touching the contact area.
• The appliance becomes hot during operation, do not
touch it and allow the appliance to cool down before
putting it away.
Cleaning
• The intervals for descaling depend on the hardness of
the water and the frequency of use.
• If the appliance switches off before the water boils,
descaling is necessary.
button. The water is heated to 100 °C.
button. The selected
pliance now keeps the temperature stable for 1 hour.
button.
it from the base! The contacts on the base are not
suitable for disconnecting the power supply.
Descaling
button.
9
28.07.22