Descargar Imprimir esta página

Utilitech 7105-06 Manual De Instalación página 10

Ocultar thumbs Ver también para 7105-06:

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION INSTRUCTIONS (Continued)
17.
Rotate the trim ring (C) until it hits the stop and cannot be
rotated further. Carefully pull hands away to verify the trim
ring (C) and glass diffuser (D) are securely attached to the
fan housing (A).
Turn on the power source. Test the unit.
CARE AND CLEANING
CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or
removing the fuse from the fuse box.
• See safety information before proceeding. Routine maintenance should be done at least once a year.
• Wash glass diffuser with mild soap and water. Dry with a cloth.
• Remove excess dirt and dust from the fan housing with a vacuum cleaner.
• Do not use solvents, thinner or harsh chemicals for cleaning the fan.
• Do not allow water to enter the motor.
• Do not immerse metal parts in water.
• Do not immerse resin parts in water more than 140°F.
BEFORE CLEANING
WARNING: RISK OF ELECTRIC SHOCK! Ensure the
electricity is shut off at the main breaker box. Either
remove the fuse or turn off the circuit breaker before
cleaning.
1.
Carefully rotate the trim ring (C) and detach it from the
grille with LED light (B).
Wash glass diffuser with mild soap and water. Dry with
a cloth.
17
D
1
D
10
A
C
A
C

Publicidad

loading

Este manual también es adecuado para:

1074715