Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS (Continued)
13.
Plug in the connectors on the grille with LED light (B) into
the fan housing (A).
Join the connectors (two hole and four hole) from the fan
motor to the fan housing (A).
14.
Secure the grille with LED light (B) to the fan housing (A)
using 4 long machine screws (BB) and metal washers
(DD).
Hardware Used
BB
Long machine screw
DD
Metal washer
15.
Choose the trim ring (C) that suits the room and place
the glass diffuser (D) into the trim ring (C).
16.
Align the three notches around the outside of the grille
with LED light (B) with the three clips on the trim ring (C).
Gently push up on the trim ring (C) and glass diffuser (D)
as far as possible until it stops.
13
LED
connector
14
x 4
x 4
15
16
Notch
Clip
9
C
Clip
Notch
Clip
4
holes
2
holes
D
Notch
Publicidad
