Publicidad
Idiomas disponibles
Idiomas disponibles
System setting
Set in FM or DAB mode. Press the Menu button (2.) then press Tune + / - (4) button to select < System >. Press
Enter button (8.) to enter the setting of the time, backlight, inactive standby, languages.
Pressing Tune + / - (4) button to select and press the Enter button (8.) to enter/confirm.
Press Menu button (2.) again to quite the setting.
Time
-
Refer to the section "Setting the Time & Date"
<System>
<Backlight>
<System>
<Inactive Standby> <OFF>, <2 hour>, <4 hour>, <5 hour>, <6 hour>
<System>
<Language>
<System>
<Factory Reset>
<System>
<Software
Upgrade>
<System>
<SW Version>
Bluetooth connecting and playback
1. Turn on the unit by pressing On/Off button (3.), then press the Mode button (7.) to select Bluetooth
mode.
2. "Bluetooth" will be shown on the LCD display. It means the Bluetooth is in searching mode.
3. Switch on the Bluetooth feature of your Bluetooth device (such as mobile phone) and select "Lenco PDR-
065" Bluetooth equipment to connect.
4. Once connected successfully, the LCD display will show "BT Connected ".
5. Start playback from your Bluetooth device and enjoy the music.
6. Rotate volume up/down knob (5.) to desired volume level.
7. You can press the Skip up
playback.
8. To disconnect the Bluetooth connection, press the Mode button (7.) to switch to another mode or turn
off the Bluetooth feature of your Bluetooth device. The LCD display will show "Bluetooth "again for
pairing of a new device or switch off the unit. Repeat step 3-5 above to connect for another Bluetooth
device.
More features
A. Alarm clock setting
This function allows the system to turn on automatically and wake you up to buzzer, FM or DAB mode. Set the
system to DAB / FM mode, then press the Menu button (2.) then press Tune + / - (4) button button to select
<System> press Enter button (8.) to confirm. Press Tune + / - (4) button to select <Alarm>, press Enter button
<Timeout>
To set the duration of the display to change the backlight
brightness from On level to Dim level at standby mode.
<10 sec>, <20 sec>, <30 sec>, <45 sec>, <60 sec>, <90 sec>,
<120 sec>, <180 sec>, <ON>
<On level>
The backlight brightness at ON (operation) mode
<High>, <Medium>, <Low>
<Dim level>
The backlight brightness at Standby mode
<High>, <Medium>, <Low>
English, Espanol, Francais, Italiano, Nederlands, Norsk, Polski, Suomi,
Dansk, Deutsch
Once perform the factory reset, all the preset station will be erased as well
as language setting, unit will back to its ordinary ex-factory setting.
<Yes>, <No>
<Yes>, <No>
To check the software version
or Skip down
button of your Bluetooth device to control the music
10
Publicidad
