Descargar Imprimir esta página

Lenco PDR-065 Manual Del Usuario página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

(8.) to enter the Timer setting mode. LCD will show Timer On time, Moreover, the timer clock will flash the
hour digit, this means the unit is all ready to enter timer setting mode.
1) Alarm 1 Set up
2) On time setting
3) Duration
4) Source
5) Frequency
6) Alarm on / off
Remark: -
For FM/DAB wake up, the system will preset to the last radio frequency being listened too before
switching off.
If wake up to buzzer is selected, the unit will emit a "beep beep" sound at the selected time.
There are about 4 seconds for the alarm setting mode, this system will return to normal mode
automatically if no keys are being pressed in this time frame.
The alarm can only work when the device is positioned and connected on the battery docking station!
B. SNOOZE
Press the Snooze key on the unit once to extend the alarm for 5 minutes every time.
C. Using Headphones
Inserting the plug of your headphones into the Headphone jack will enable you to listen in private.
READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES
1)
Avoid extended play at very high volume as it may impair your hearing.
2)
If you experience ringing in your ears, reduce the volume or shut off your unit.
3)
Keep the volume at a reasonable level to allow you to hear outside sounds.
: Press the Alarm key to select the set up of Alarm 1. Press OK key to start the
set up.
: Once enter the set up of The Alarm, the hour digits is flashing. Press + / - key
to set the hour and then press Enter key to confirm the hour.
Then the minute digits is flashing. Press + / - key to set the hour and then press
Enter key to confirm the minute.
: Then press + / - key to select the duration of the alarm between: 15, 30, 45, 60,
90, 120 (minutes).
Tune + / - (4) button to select timer on mode. Then press Enter button (8) to
store the timer on mode.
: Press up / down key to select the wake up mode between: Buzzer, FM, DAB.
FM/DAB: can select between last listened or preset station list.
Press + /- key to select and then press OK key to confirm the setting.
: You can select the alarm frequency between: Daily, Once, Weekends or
Weekdays.
If you choose Once, you need to confirm the date of the alarm.
Press Tune + / - (4) button to select timer on volume level and press Enter button
(8) to complete the timer setting. The Unit will return to standby mode and the
display will show the timer icon " ".
Press + / - key to select alarm on or off, and then press Enter key to confirm the
setting.
Once the alarm is on, the alarm icon
On the other hand, the alarm icon will be disappeared if the alarm is being turn
off.
will be shown on the display.
11

Publicidad

loading