Skywalker Trampolines STRC915.2 Manual Del Usuario página 9

ASSEMBLY
STEP 3
M10x80mm
16 17
Bolt (x4)
(18)
(17)
(16)
STEP 4
1
Corner Tube (x1)
(3)
Four holes
M10 Washer
18
M10 Nut (x4)
(x4)
(18)
(17)
2 3
Straight Tube (x1)
(1)
Three holes
on right
hand side
Then, secure using four M10x80mm bolts
(16), four M10 washers (17), and four M10
nuts (18). Repeat steps 2-3 to assemble
one additional frame section.
Locate two sockets (3), one corner tube (1) and one
straight tube (2), and connect them together as
shown. Make sure the end with three holes is on the
right side and the straight tube connects to that
end.
Socket (x2)
Make sure the other spring holes are facing down.
9
(18) (17)
(18)
(17)
(2)
Spring holes
face down
(16)
(16)
(3)