ProBreeze PB-H02 Manual De Instrucciones página 7

Setting the Timer:
Note: When you first use the heater, all of the segments should point inwards.
Note: Do not turn the dial anti-clockwise.
1. Plug the heater in.
2. Set the power and temperature to the desired settings.
3. The triangular point will stay fixed, turn the dial clockwise around it so that the
triangular point is pointing at the current time of day.
4. Push the segments outwards for the time period you want the heater to be
turned on.
5. The heater will now cycle on and off according to these settings.
6. Once unplugged, the heater timer will stop and need to be reset.
CLEANING & STORAGE
WARNING: Always turn the heater OFF, unplug the power cord from the
electrical outlet and allow the appliance to completely cool down before
handling or cleaning it.
CAUTION: Do not allow water or other liquids to run into the interior of the
heater, as this could create a fire and/or electrical hazard.
CAUTION: Do not use any abrasive cleaners or solvents, as heater damage
will occur.
- Clean the exterior surface of the heater by wiping it with a soft, damp cloth.
Dry the heater with a soft clean cloth.
- To store your product out of season, we recommend using the original or similar
size box.
- Do not kink or wrap the power cord and plug around the appliance, as this may
cause the insulation to weaken or split, particularly where it enters the
- appliance.
English | 6