Samsung SNC-B2315 Manual De Instrucciones página 10

Rear
1
2
4
1
Audio Out
2
Audio In
3
SDHC Memory Card Slot
4
Video Out
5
Reset Button
6
Ethernet Port
7
Power Port
06_ Preparation
5
For outgoing audio signals.
For incoming audio signals.
This is where you insert your SDHC memory card.
For outgoing video signals from the camera.
This port connects to the monitor's video in port.
Reverts all camera settings to their default.
When it is pressed for 3 seconds, the system indicator goes
out and the system reboots.
When the camera is reset, connection is possible only after the
basic network settings (IP address, subnet mask, gateway, etc.)
have been configured again using the IP installer program.
Ethernet cable port.
Connect the power cable to this port.
6 7
3
9
8