Royal Catering RC-MV-05 Manual De Instrucciones página 27

During the pause, the display will show the remaining cooking time.
The fan and the lamp are working.
The pause mode will go back to the idle mode in exactly the same way as the standby
mode, depending on user option # 4. In addition, if the "stop/reset" button is
pressed, the unit will immediately go into standby mode. OR, if the "start" button is
pressed, the unit will go into run mode.
3.3.6. Manual cooking setting mode
If the unit is in standby mode, pressing the "Time Entry" button will enter the unit
into the manual cooking mode.
In this mode, the display shows "00:00".
To select the power level, press the "Hold 0%", "Defrost 20%", "Medium 50%" or
"Med.-Hi 70%" button and the display will show the selected power level. If the
same button is pressed twice, the power will be set to PL10. If no button is pressed,
PL10 is set as default.
The fan and the lamp are working.
While setting up this process, press "Start" to enter manual cooking mode. Pressing
the "stop/reset" button will enter the standby mode.
3.3.7. Manual cooking mode
Press "start" to start the appliance in manual cooking mode. The display will show
the time remaining until the end of cooking. The fan and the lamp are working. At
the end of the cooking program, the appliance will enter the cooking cycle end
mode. If the "stop/reset" button is pressed, the unit will go into pause mode.
3.3.8. End of cooking mode
After the time has passed in the manual cooking mode or in the programmed
cooking mode, the appliance enters the cooking cycle end mode.
"End" is displayed during this mode.
If the user option OP: 11 or OP: 12 is selected, the unit will beep until the user
confirms it by opening and closing the door or pressing the "X" button. If the OP
user option: 10 is selected, the unit enters standby mode after a 3-second beep.
3.3.9. Operating mode with preset cooking programs
This mode allows you to cook food with one touch. In standby mode, pressing one
of the numeric keys on the keypad will cause the machine to run the program
associated with that key.
The LED displays the remaining cooking time. If it is multi-stage cooking, the total
remaining cooking time does not display the specified stage cooking time.
At the end of the program, the appliance will enter the cooking cycle end mode.
If the "stop/reset" button is pressed, the unit will go into pause mode.