Royal Catering RC-MV-05 Manual De Instrucciones página 29

Idiomas disponibles

2. If the program needs to be reset, just repeat the above steps.

3. If the "stop/reset" button is pressed in the last step, the unit will return to standby

mode. The settings will not be saved.

3.3.11. Cooking double the amount

In standby mode, press the "X2" button (the display will show "double"). Then press

the number buttons 0-9 within 5 seconds and the appliance will start cooking with

the set cooking time.

At the end of the program, the appliance will enter the cooking cycle end mode.

3.3.12. Programming cooking stages

This allows the user to cook food products at a combination of different power

levels.

1) In cooking mode or in memory mode, you can set up to three levels.

2) After setting the power and time for the first stage, press "Time Entry" to set

the second stage. Set the third stage in the same way.

3) After setting the second or third step, press the "Time Entry" button and the

display will show "S-2" or "S-3".

4) Press the "Start" button to start cooking.

Example: Set three stages as memory mode. The first stage is PL7 and the time

is 1 minute 25 seconds. The second stage is PL5 and the time is 5 minutes and

40 seconds. The steps are as follows.

b. Press the number button "3" to save the program to "3".

d. Press "Med.-Hi 70%", "PL7" is displayed.

e. Press buttons "5", "4", "0", "5:40" is displayed.

3.3.13. Usage options mode

Open the appliance's door and press "2" for 5 seconds. The buzzer will sound once

and the unit will enter this mode.

The LED displays "OP: - -".

Press any numeric button to enter the corresponding mode setting.

For example: to set the buzzer voice to medium, press "2" and "OP: 22" will be

displayed.

If there is a need for another change, keep pressing "2", the LED will display "OP:

20", "OP: 21", "OP: 22", "OP: 23", "OP: 20" cyclically.

Press "Start" to save the current setting. After saving, the display shows "OP: - -".

During the setting process, press "Stop/reset" to enter the door open mode. Closing

the door will put it into standby mode.

Standby, press "1" for 5 seconds, LED displays "ProG".

Press "1", "2", "5" to enter the cooking time. "1:25" is displayed.

Press "Medium 50%", "PL5" is displayed.

Press "Start" to save the program.