Publicidad
Idiomas disponibles
Idiomas disponibles
Adjusting the speaker balance
individually
You can adjust the speakers individually,
except for the front speakers.
The center and rear speakers and subwoofer
volume levels are adjusted to the front
speaker volume level as the criterion.
The speaker to be adjusted flashes in the
display window.
SHIFT
CENTER
+/–
REAR
+/–
To adjust the center speaker
Press CENTER +/–.
To adjust the rear speakers
Press REAR +/–.
To adjust the subwoofer
Press WOOFER +/–.
GB
16
Downloaded from:
MUTING
(TEST TONE)
https://www.usersmanualguide.com/
Adjusting the speaker balance on the
subwoofer
WOOFER
+/–
1
Press MENU/ENTER.
2
Turn the VOL/SELECT knob (SETUP is
displayed) , and then press MENU/
ENTER.
3
Turn the VOL/SELECT knob to select
the desired level, and then press MENU/
ENTER.
• C-LEV (CENTER LEVEL)
• R-LEV (REAR LEVEL)
• W-LEV (WOOFER LEVEL)
4
Turn the VOL/SELECT knob to adjust
the speaker balance, and then press
MENU/ENTER.
z
When you press MENU/ENTER for more than 2
seconds while setting on the subwoofer, the display
will be returned to the previous menu.
z
The test tone will make it easier to hear the
difference in the volume level of each speaker.
While pressing SHIFT on the remote, press
MUTING (TEST TONE). On the system, press
MENU/ENTER and turn the VOL/SELECT knob
(T-T (TEST TONE) is displayed), and then press
MENU/ENTER.
You will hear the test tone from each speaker in
sequence. Adjust the volume level so that the volume
of the test tone from each speaker sounds the same on
the remote.
To turn off the test tone, while pressing SHIFT, press
MUTING (TEST TONE) again. Or press MENU/
ENTER on the system again.
MENU/
VOL/
ENTER
SELECT
Publicidad
