Uebler i21 S Instrucciones De Montaje Y De Uso página 16

Mounting the bicycle rack on the vehicle
14
II
1
1. Open the flap of the bag
2. Press the safety lever (11) so that the attachment (10) comes
out.
Note
For the i41 S bicycle rack, the coupling neck of the towbar (15)
must have a diameter of at least 1.2 inch (28.5 mm) (A).
3. Hold the bicycle rack (1) upright and push it with the
attachment (10) onto the ball head of the towbar (15) (arrow I).
4. Tilt the bicycle rack (1) downwards until the safety lever (11)
audibly engages (arrow II).
The red marking on the safety lever (11) must no longer be
visible.
5. Check that the bicycle rack (1) is parallel to the bumper and
roughly parallel to the ground.
Shake the bicycle rack (1) to check that it is firmly fitted. If
necessary, remove the bicycle rack (1) and fit it again.
1 Bag available as an option (for Uebler i21 S bicycle rack, order
no. 25020, for Uebler i31 S bicycle rack, order no. 25030, for
Uebler i41 S bicycle rack, order no. 25040).
11
I
10 15
A
1
(14).
14
6. Pull the bag (14) off the bicycle rack (1).
7. Lock the bicycle rack (1)using the key (5) and then remove it.
8. Pull the plug (12) out of the plug holder on the wheel rail (8).
M+P-25A-0290
9. Connect the plug (12) to the socket (16) on the vehicle and turn
it clockwise as far as it will go.
- 14 -
12 5
1
8
12 16
M+P-25A-0291
M+P-25A-0292