Uebler i21 S Instrucciones De Montaje Y De Uso página 21

Removing the bicycles
Release the holders (2), (3) and (4) and remove the bicycles in the
reverse order.
Put the holders (2), (3) and (4) in the side pocket of the bag (14).
Folding the bicycle rack down and back up
again
Attention
Slowly fold the bicycle rack down, making sure that no persons
or objects are in the way.
People may sustain crush injuries and objects may be dam-
aged if they get in the way.
Make sure the bicycle rack engages fully with both hooks and
that it locks when folded up, otherwise it could swing down dur-
ing a journey, injuring you or others and/or causing property
damage.
Folding the bicycle rack down
The bicycle rack can be folded down to load and unload the
vehicle.
27
Attention
When using the Uebler i41 S bike rack (folds 90°), the handle-
bars of the fourth bicycle may touch the ground due to the larg-
er tilt angle. This may result in damage to the handlebars.
Remove the bicycle when folding it down, if necessary.
Press the foot lever (27) and pull the bicycle rack (1) down by
pulling on the rack frame (6) or on the frame of a mounted bicycle.
Folding the bicycle rack back up
1
1. Fold the bicycle rack (1) back up so that both hooks (28) are
fully engaged and lock into the frame (29).
2. Shake the bicycle rack (1) to ensure that it is seated firmly.
If necessary, fold the bicycle rack (1) down and back up again.
Preparation before driving
Attention
6
Always check all screw connections and fastenings of the bicy-
cle rack and the bicycles after every assembly, before every trip
and at intervals during lengthy trips to make sure they are sit-
ting firmly, and retighten them if necessary.
Otherwise, the rack and the bicycles mounted on it may come
loose, injuring other persons or causing an accident.
Repeat this check at regular intervals depending on road con-
1
ditions.
Attention
Check that the lights are in perfect working order before each
M+P-25A-0301
journey, otherwise accidents may occur.
Note
The number plate and the lights on the bicycle rack must not be
obscured.
If the bicycle rack is not fully loaded, make sure that:
• Unused holders were removed from the rack frame and safely
stowed in the luggage compartment
• All keys are removed and kept in a safe place
• The lashing straps on all the wheel rails are closed
- 19 -
28
29
28
29
M+P-25A-0302