Publicidad
Idiomas disponibles
Idiomas disponibles
Changing bulbs
Attention
When changing bulbs the vehicle ignition must be switched off
and the plug for the lights removed from the towbar electrical
socket. Failure to do so can result in a short circuit or other
damage. If you are not sure, have the bulbs replaced by a spe-
cialist workshop.
Note
The lamp change is described and illustrated using the left tail
light unit on the bicycle rack. The procedure is the same for the
right tail light unit.
Note
When ordering a new bulb, the designation for the bulb con-
cerned must be specified.
33
Designation
a
30 Indicator
BL PY21W 12 V yellow
a
31 Number plate lighting
BL C5W 12 V (35 mm long) white
a
32 Rear fog light
for left tail light unit
BL PR21W 12 V red
a
Reversing light
for right tail light unit
BL P21W 12 V white
a
33 Brake/tail light
BL P21/5W 12 V white
a
Commercially available bulb.
30
32
9
31
1. Slide the cover (34) on the bottom of the holder (35) in the
direction shown by the arrow and remove the cable below it all
the way out of the holder (35).
2. Press the catches (36) and carefully pull the tail light (9) out of
M+P-25A-0303
the holder (35).
Spare part
no.
E1687
E1687
37
E1687
E1687
E1687
37
3. Unscrew the screws (37) and take off the lens (38).
- 20 -
36
35
34
35
M+P-25A-0304
38
M+P-25A-0305
Publicidad
