Bromic Heating 3400W Manual De Instrucciones página 8

CEILING RECESS INSTALLATION INSTRUCTIONS CONTINUED ...
17. Attach the trim assembly to the
ceiling recess box by hooking on one
side of the mounting tab features to
2x M5x12mm hex flange bolts.
Ensure heater cable placement is on
the inside of the mounting hooks.
!
IMPORTANT
Ensure heater cable placement is on
the inside of the mounting hooks.
18. Rotate the trim assembly and
attach the other side of the mounting
tabs to the other 2x
flange bolts.
!
WARNING
The heater supply cable MUST completely rest on
the support structure. The supply cable MUST NOT
be touching the rear surface of the heater.
19. Raise up the heater trim assembly
so it is flush with the ceiling.
Tighten the 4x M5x12mm hex flange
bolts using a 8mm (5/16") spanner to
secure the heater in place.
Check heater alignment is flush with
the ceiling before tightening the
screws.
Mounting tab
feature
M5x12mm hex
bromic.com
8mm (5/16")
4x
8