Windgoo T10 Manual página 13

-Only the charging equipment provided by our company is allowed to charge the electric scooter. Do not charge
indoor.
-It is forbidden to charge the over-discharged lithium ba�ery. Over-discharged ba�eries have poten�al safety
hazards and can only be scrapped.
-The ba�ery of an electric scooter can only be used under the permission of local laws.
4.3 Charging steps
-Make sure that the charging port is dry without foreign ma�er, and the electric scooter is turned off.
-First, plug the charger into the charging port of the electric scooter, and then plug the other end of the charger
into the commercial power supply (100v-240v; 50 / 60Hz), and make sure that the indicator lamp of the charger is
on normally.
-When the charger indicator lamp is red, it indicates that the charging is normal. Otherwise, please check whether
the circuit is connected well.
-When the charger indicator lamp is green, it indicates that the ba�ery is full and you can stop charging.
-A�er charging is completed, be sure to close the dust cover of the charging port to avoid short circuit caused by
the contact with external metal objects or water in the charging port.
1.Under the shutdown state, plug the charger into the charging port of the electric scooter.
2.It can be charged a�er power on.
13