Windgoo T10 Manual página 15

6.1 Maintenance precau�ons:
-Make sure that the charger and charging line of the electric scooter are disconnected, and that the electric
scooter is turned off.
-Wipe the shell with a so� cloth to clean the electric scooter. Do not add too much lubrica�ng oil to bearing
maintenance.
Warning
-It is forbidden to use a high-pressure water gun or soak in liquid to clean the electric scooter, which will cause
permanent damage to the internal electronic components of the host.
-In order to protect the safety of users, users are not allowed to disassemble the electric scooter privately, other-
wise it will be regarded that the user automa�cally give up the maintenance and warranty rights of the product.
Storage
-Before storage, please fully charge your scooter to prevent over-discharge of the ba�ery caused by prolonged use.
Please make sure to charge and discharge it at least once a month.
-Do not charge the scooter if the storage temperature is below 0°C. It can be placed in an indoor environment
(above 10°C) for recharging and stored at -10°C-35°C.
-Please store the electric scooter indoors in a dry place with proper temperature. You can shield the electric
scooter to prevent dust accumula�on from affec�ng performance.
Endurance instructions
-Fully charged, 60kg load, 25 ° C. It is measured on the flat and hardened road, no wind environment, driving in
cruise mode at a speed of 15km / h. The driving mileage will vary according to different load, wind speed, road
condi�ons and operator habits.
6 Daily maintenance
15