Publicidad
Enlaces rápidos
USER & INSTALLATION GUIDE
VYPR DUO 3x2
GLOBAL
THANK YOU FOR CHOOSING FLUENCE!
Please confirm that all hardware and accessories received are correct for your
VYPR application before you begin the installation.
1. SYSTEM HARDWARE & ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . 2
1.1 Light Fixture and Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.2 Mounting Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 DC Power Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.4 DC Dimming Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.5 AC Power Extension Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. CAUTIONS AND WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. IMPORTANT SAFETY PRECAUTIONS & EXPLANATIONS . . . . . . . . . . . . 8
4. CULTIVATION BEST PRACTICE . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5. GENERAL CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6. SYSTEM WIRING DIAGRAMS AND SPECIFICATIONS . . . . . . . . . . . . . . 9
7. VYPR DUO 3X2 REMOTE MOUNT . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7.1 Dimensions And Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7.2 System Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8. REMOTE MOUNTING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . 11
8.1 Perpendicular Mount Kit (Fixture) . . . . . . . . . . . . . . . . . . . . . . . . . 11
8.2 Parallel Mount Kit (Fixture) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8.3 Unistrut Hanger Kit (Fixture and PSU2) . . . . . . . . . . . . . . . . . . . . . . 13
8.4 Pipe Hanger Kit (Fixture and PSU2) . . . . . . . . . . . . . . . . . . . . . . . . 13
8.5 Square Hanger Kit (Fixture and PSU2) . . . . . . . . . . . . . . . . . . . . . . . 13
8.6 Power Supply Surface Mount Kits (PSU2) . . . . . . . . . . . . . . . . . . . . . 15
9. VYPR DUO 3X2 CRADLE MOUNT . . . . . . . . . . . . . . . . . . . . . . . . . . 16
9.1 Dimensions And Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
9.2 System Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
10. CRADLE MOUNTING INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . 18
10.1 Cradle Mount Unistrut Installation . . . . . . . . . . . . . . . . . . . . . . . . 18
10.2 Cradle Mount Combo Hanger . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
11. PRODUCT GUARANTEE & WARRANTY . . . . . . . . . . . . . . . . . . . . . . 20
© Copyright 2023 Fluence Bioengineering 032023 | Subject to change without notice
Publicidad
Resumen de contenidos para FLUENCE VYPR DUO 3x2 GLOBAL
- Página 1 11. PRODUCT GUARANTEE & WARRANTY ..... . 20 © Copyright 2023 Fluence Bioengineering 032023 | Subject to change without notice...
- Página 2 1. SYSTEM HARDWARE AND ACCESSORIES 1.1 Light fixture and Power Supply SKU MATRIX FOR LIGHT FIXTURE AND POWER SUPPLY AMERICAS FAMILY MODEL PhysioSpec™ SPECTRUM INPUT VOLTAGE PACKAGING VYPR Gen 3 X DUO BROAD R3 (Greenhouse) 120-277 V AC Bulk Pack BROAD R4 (Indoor) 347-480 V AC Single Pack...
- Página 3 1. SYSTEM HARDWARE AND ACCESSORIES 1.2 Mounting Hardware (Sold and Packaged Separately) Power Supply Power Supply Power Supply Quantity per QTY/ MOUNTING HARDWARE PSU2 LVG 600W PSU2 HVG 600W PSU2 HVE 600W Ordering Code VYPR 3X2 Carton 120-277 V AC 347-480 V AC 400 V AC Unistrut Wire Hanger (unistrut width ≤...
- Página 4 1. SYSTEM HARDWARE AND ACCESSORIES 1.5 AC Power Cables (Sold and Packaged Separately) AC POWER CABLE (Power Supply to AC Line) AMERICAS Quantity per Power Supply Ordering Code QTY/ Carton 6-FT (1.83 m) AC Extension Cable, NEMA 5-15P Plug, M19 Push Lock, Max 125 V AC 1 pc CACA-70748-10 10 pcs...
- Página 5 LED manufacturer’s bin tolerance. 2 Wattage values are typical expected values. Fluence maintains a tolerance of ±10% on flux and power specifications. Target light levels can vary from projected levels depending on ambient temperature, room reflections values and dirt accumulation.
- Página 6 op een vlak oppervlak om het risico op oververhitting of brand te voorkomen. Zorg altijd voor voldoende 2. CAUTIONS AND WARNINGS ventilatie van armaturen en stroomvoorzieningen. HOIATUS! (EE) OSTRZEŻENIE (PL) Elektrilöögi oht. Tõsiste vigastuste tekkevõimaluse vähendamiseks võtke enne liikumist või puhastamist alati Ryzyko porażenia prądem elektrycznym.
- Página 7 2. CAUTIONS AND WARNINGS живлення було занурено у воду, перш ніж дістати його, вимкніть автоматичний мікровимикач і від’єднайте виріб від розетки. Щоб уникнути пошкодження зору, не дивіться на відкриті світлодіоди. Світлодіоди й поверхні радіатора можуть бути гарячими. Перш ніж торкатися приладу, зачекайте, доки...
- Página 8 4. The unit has been dropped, or its enclosure or chassis is damaged. www.fluence.science/support-center/ 4. CULTIVATION BEST PRACTICES Fluence encourages everyone to experiment and pursue their own VYPR is a high-performance lighting techniques. Every crop is different and everyone has different goals.
- Página 9 Male M12, 3-pin Pin 4: 12VDC+ WIELAND© is a copyright of Wieland Electric GmbH. All rights reserved. Maximum Ambient Operating Temperature: 95° F /35° C SYSTEM SPECIFICATION SHEETS For complete product information and system specifications please visit www.fluence.science/support-center/ or email support@fluence-led.com...
- Página 10 7. VYPR DUO 3X2 REMOTE MOUNT 7.1 Dimensions And Weight VYPR 3x DC Input Connector: 2.91” (74 mm) 24.09” (612 mm) Push lock 2-pin M19, Male VYPR 3x Length Width Height Weight Region PSU2 LVG 600W 24.09" 2.91" 3.23" 4.8 lb Global 120-277 V AC 612 mm...
- Página 11 • NE PAS mettre en contact la matrice de DEL ou le couvercle de protection avec un objet pointu ou une force qui a Fluence wet location dimming pourrait endommager les DEL. cable, i.e p/n CDMA-71561-10.
- Página 12 8. REMOTE MOUNTING INSTRUCTIONS 8.1 VYPR Perpendicular Mount Kit (AMV3-10572-20) Suitable for 25 mm x 50 mm T-slotted strut. FRONT VIEW 8.38” (213 mm) Take (2) mounting hangers. Hang both brackets over the support structure as shown. Hold the VYPR fixture up to the hangers, perpendicular to the support structure, as shown.
- Página 13 8. REMOTE MOUNTING INSTRUCTIONS 8.3 Unistrut Hanger Kit (AMV2-10120-20) Suitable for Unistrut up to ” (45 mm) wide. 8.4 Pipe Hanger Kit (AMV2-10121-20) Ideal for mounting under pipes up to 1 ¾” (45 mm) in diameter, or can be paired with chain or cable to suspend the fixture lower while the pipe bracket levels the fixture.
- Página 14 8. REMOTE MOUNTING INSTRUCTIONS Light Fixture with Unistrut, Pipe, or Square Hanger Kit Take (2) mounting brackets. Hang a bracket over the support structure and hold up the VYPR fixture under it. While maintaining a firm grip on both, pinch the bottom of the bracket inward and insert it into the top of VYPR heatsink between the fins, release the tension of the bracket.
- Página 15 8. REMOTE MOUNTING INSTRUCTIONS 8.6 Power Supply Remote with Surface Mount Kit (For AC Input Voltage 277-480 V ONLY) Surface mount brackets are PSU2 LVG, HVE 1.52” (38.62 mm) + PS Height suitable for mounting to any flat surface that will support the weight of the power supply.
- Página 16 9. VYPR DUO 3X2 CRADLE MOUNT COMPONENTS CRADLE MOUNT KITS WITH POWER SUPPLY A. Cradle Mount Kit B. T-Cable LVG & HVE Power Supplies HVG Power Supply (AMV3-10492-10) (AMV3-10493-10) C. VYPR 3x A1. Combo Mount Wire Hangers D. PSU2 A2. Cradle Mount Brackets PSU2 LVG PSU2 HVG 600W 120-277 V AC...
- Página 17 (Refer to Section 6). Optional: if connecting to a dimmer system or controller, remove the dust cap on the power supply, and connect a Fluence wet location dimming cable, i.e p/n CDMA-71561-10. CAUTION: To protect the LED ARRAY, •...
- Página 18 Suitable for Unistrut up to 1 5/8” (41.28 mm) wide and 1 5/8” (41.28 mm) tall. Place the power supply on a flat work surface as shown, with the “FLUENCE” name upside down. Place one bracket behind the power supply end plate and align the screw holes.
- Página 19 Suitable for pipes up to 1 3/4” (45 mm) in diameter, and for trusses or channel up to 2 3/4” (70 mm) wide. Place the power supply on a flat work surface as shown, with the “FLUENCE” name upside down. Place one bracket behind the power supply end plate and align the screw holes.
- Página 20 Fluence lighting systems comply with applicable standards and are intended to be used with Fluence power supplies, cables and mounting hardware. The use of Fluence lighting systems with power supplies, cables and mounting hardware by others will limit specifications and void the warranty.