Publicidad
8. REMOTE MOUNTING INSTRUCTIONS
Light Fixture with Unistrut, Pipe, or Square Hanger Kit
1
Take (2) mounting brackets. Hang a bracket over the support structure
and hold up the VYPR fixture under it.
2
While maintaining a firm grip on both, pinch the bottom of the bracket
inward and insert it into the top of VYPR heatsink between the fins,
release the tension of the bracket.
When installed properly, the bracket should hook into both sides of the
3
VYPR heatsink frame to provide a level and secure mount.
Repeat steps 1-3 on the other side of the fixture to finish mounting your
VYPR. The two brackets should be centered to the fixture and widely
4
spaced out, with 3"-8" to the fixture edge.
Power Supply Remote with Unistrut, Pipe, or Square Hanger Kit
1
Take (2) mounting brackets and hang a bracket over the support
structure. Locate the holes for brackets on the narrow side of PSU
power supply, hold up the power supply under the support structure
under it.
2
While maintaining a firm grip on both, pinch the bottom of the bracket
inward and horizontally insert it into the receiving holes on the PSU
power supply, release the tension of the bracket.
Lift the ends of the brackets up to a 90° angle. Repeat above steps to
3
install another bracket on the PSU power supply.
14
3
1
1
4
2
3
2
Publicidad
