Hikmicro AI56 Guia De Inicio Rapido página 13

점을 주의하시기바라며 , 가정 외의 지역에서
사용하는 것을 목적으로 합니다 .
Safety Instruction
These instructions are intended to ensure that user
can use the product correctly to avoid danger or
property loss.
Laws and Regulations
● Use of the product must be in strict compliance
with the local electrical safety regulations.
Transportation
● Keep the device in original or similar packaging
while transporting it.
● Keep all wrappers after unpacking them for future
use. In case of any failure occurred, you need to
return the device to the factory with the original
wrapper. Transportation without the original
wrapper may result in damage on the device and
the company shall not take any responsibilities.
● Do not drop the product or subject it to physical
shock. Keep the device away from magnetic
interference.
Power Supply
● Please purchase the charger by yourself. Input
voltage should meet the Limited Power Source (5
VDC, 2 A) according to the IEC61010-1 standard.
Please refer to technical specifications for detailed
information.
● Make sure the plug is properly connected to the
power socket.
● DO NOT connect multiple devices to one power
adapter, to avoid over-heating or fire hazards
caused by overload.
Battery
● Improper use or replacement of the battery may
result in explosion hazard. Replace with the same
or equivalent type only. Dispose of used batteries
in conformance with the instructions provided by
the battery manufacturer.
● The built-in battery cannot be dismantled. Please
contact the manufacture for repair if necessary.
● For long-term storage of the battery, make sure it is
fully charged every half year to ensure the battery
quality. Otherwise, damage may occur.
● DO NOT charge other battery types with the
supplied charger. Confirm there is no flammable
material within 2 m of the charger during charging.
● DO NOT place the battery near heating or fire
source. Avoid direct sunlight.
● DO NOT swallow the battery to avoid chemical
burns.
● DO NOT place the battery in the reach of children.
● The lithium battery voltage is 3.6 V, and the battery
capacity is 6230 mAh (22.43 Wh).
● The battery is certified by UL2054.
Maintenance
● If the product does not work properly, please
contact your dealer or the nearest service center.
We shall not assume any responsibility for
problems caused by unauthorized repair or
maintenance.
● A few device components (e.g., electrolytic
capacitor) require regular replacement. The
average lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
● Wipe the device gently with a clean cloth and a
small quantity of ethanol, if necessary.
● If the equipment is used in a manner not specified
by the manufacturer, the protection provided by
the device may be impaired.
● We recommend you send the device back for
calibration once a year, and please contact the local
dealer for the information on maintenance points.
● Please notice that the current limit of USB 3.0
PowerShare port may vary with the PC brand,
which is likely to result in incompatibility issue.
Therefore it's advised to use regular USB 3.0 or USB
2.0 port if the USB device fails to be recognized by
PC via USB 3.0 PowerShare port.
Using Environment
● Make sure the running environment meets the
requirement of the device. The operating
temperature shall be -20 °C to 50 °C (-4 °F to
122 °F), and the operating humidity shall be 90% or
less.
● DO NOT expose the device to high electromagnetic
radiation or dusty environments.
● DO NOT aim the lens at the sun or any other bright
light.
Technical Support
● The
https://www.hikmicrotech.com/en/contact-us.ht
ml portal will help you as a HIKMICRO customer to
get the most out of your HIKMICRO products. The
portal gives you access to our support team,
software and documentation, service contacts, etc.
Emergency
● If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the power
cable, and contact the service center.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road,
Xixing Subdistrict, Binjiang District, Hangzhou, Zhejiang
310052, China
Hangzhou Microimage Software Co., Ltd.
11