Worx WX852 Manual De Instrucciones página 8

additionally seek medical help.
Liquid ejected from the battery
may cause irritation or burns.
14. Do not expose a power pack to
fire or excessive temperature.
Exposure to fire or temperature
above 130°C may cause
explosion. The temperature of
130°C can be replaced by the
temperature of 265°F .
15. Have servicing performed by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
product is maintained.
16. The battery terminal not
connected to the chassis has
to be connected first. The other
connection is to be made to the
chassis, remote from the battery
and fuel line. The battery charger
is then to be connected to the
supply mains after charging,
disconnect the battery charger
8
from the supply mains. Then
remove the chassis connection
and then the battery connection
SAFETY WARNINGS FOR
BATTERY CELLS INSIDE
THE TOOL
a) Do not dismantle, open or
shred cells.
b) Do not expose power tool to
heat or fire. Avoid storage in
direct sunlight.
c) Do not short-circuit charging
terminal. Do not store power
tool haphazardly in a box
or drawer where charging
terminal may short-circuit
MULTI FUNCTION 4L JUMP
STARTER WITH LED LIGHTS
each other or be short-
circuited by conductive
materials. When power tool
is not in use, keep it away from
other metal objects, like paper
clips, coins, keys, nails, screws
or other small metal objects, that
can make a connection from one
charging terminal to another.
Shorting the battery terminals
together may cause burns or fire.
d) Do not remove power tool
from its original packaging
until required for use.
e) Do not subject power tool to
mechanical shock.
f) In the event of battery
leaking, do not allow the
liquid to come in contact with
the skin or eyes. If contact
has been made, wash the
affected area with copious
amounts of water and seek
medical advice.
g) Observe the plus (+) and
minus (–) marks on the
equipment and ensure correct
use.
h) Keep power tool out of the
reach of children.
i) Seek medical advice
immediately if a cell has been
swallowed.
j) Keep power tool clean and
dry.
k) Wipe the charging terminals
with a clean dry cloth if they
become dirty.
l) Power tool need to be
charged before use. Always
use the correct charger and
refer to the manufacturer's
instructions or equipment
EN