Descargar Imprimir esta página

Danby DFF142E1WDB Manual Del Propietário página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION INSTRUCTIONS
INSTALLATION
• Two people should work together to move the appliance.
• Remove all packaging before installation. Wipe the outside with a
soft, dry cloth and the inside with a warm, wet cloth.
• Do not place in direct sunlight or near sources of heat, like a stove
or heater, as this can increase electrical consumption. Extreme
cold ambient temperatures may cause the refrigerator to perform
improperly.
• Do not use near water, for example in a wet basement or near a sink.
• This refrigerator is intended for household use only. It is not designed
for outside installation, including anywhere that is not temperature
controlled like garages, porches, vehicles, etc.
• Let the refrigerator stand upright for approximately 6 hours before
plugging it in. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
• This refrigerator is 70 cm (27.6 inches) wide by 154 cm (60.6
inches) high by 73.1 cm (28.8 inches) deep.
• Allow 5 cm (2 inches) of space on the sides and back of the
refrigerator and 10 cm (4 inches) between the top of the refrigerator
and any adjacent walls.
• This refrigerator is intended for free-standing installation only and
is not intended to be built into a cabinet or counter. Building in this
refrigerator can cause it to malfunction.
5

Publicidad

loading

Este manual también es adecuado para:

Dff142e1ssdb