Ego Power+ FN1800E Manual Del Usuario página 11

1. Loosen and remove the six screws to PARTIALLY lift
the front grill guard off from the fan enclosure.
CAUTION:
To prevent damage, do not remove the front
grill guard completely without disconnecting the intake tube
FIRST.
2. Depress the black rubber at end of the nut to pull out
the intake tube.
3. Remove the front grill guard completely.
4. Rotate the fan blade lock cover clockwise to release
the fan blade from the shaft.
5. Remove the fan blade.
6. Clean the fan blade and the enclosure interior as
necessary.
7. Reassemble them in reverse order, and make sure:
◾
the intake tube is properly connected to the nut.
◾
the intake tube is placed properly into the slot on
the grill guard.
Fig. I1 and I2 parts description see below
I1-1 Front Grill Guard I1-4
I1-2 Screw(6) I1-5
I1-3 Nut I2-1
I2-2 Fan Blade
TRANSPORTING
◾
The fan is equipped with a top handle for carrying the
fan for short-distance trips or crossing rough surface/
terrain.
◾
For long-distance transport, use the telescopic handle
to roll the fan. Use the top handle to tilt the fan and
then pull out the telescopic handle until you hear a
"click". When the telescopic handle is not used, push it
into the tool (Fig. J).
STORAGE
1. Remove the battery pack.
2. Clean the fan thoroughly.
3. Empty the intake tube and filter.
4. Place the intake tube into either storage position
located at the back of the fan (Fig. K1 & Fig. K2).
5. Store the fan in a dry, well-ventilated area, out of
the reach of the children. Do not store the fan on or
adjacent to fertilizers, gasoline, or other chemicals.
PROTECTING THE ENVIRONMENT
Black Rubber
Intake Tube
Lock Cover
56 VOLT LITHIUM-ION CORDLESS MISTING FAN — FN1800E
Do not dispose of electrical equipment,
used battery and charger into household
waste! Take this product to an authorized
recycler and make it available for separate
collection. Electric tools must be returned
to an environmentally compatible recycling
facility.
EN
11